Blacoxp Admin
Nombre de messages : 1320 Age : 35 Localisation : Saint Germain en Laye Date d'inscription : 19/02/2007
| Sujet: SR16 URX G&P (shorty) Sam 1 Mar - 13:16 | |
| Salut les chouchoux, Commande passée jeudi après-midi, reçu ce matin, j'ai envi de dire "Waouh", sont fort chez Redwolf. Petit descriptif RS de la bête: Descriptif modèles URX: - Citation :
The Knight's Armament Company Rail Adapter System II Upper Receiver Extension, or RAS II URX, is a free-floating rail adapter forend system for AR-15 type rifles. The URX was created as an entry for the RIS II portion of the SOPMOD (Special Operations Peculiar Modification) Block II upgrade program. It was rejected because mounting a M203 grenade launcher prohibited free-floating of the rifle barrel. The follow-up URX II rectified this by accommodating a modular mount for the M203 that does not impinge on the rifle barrel in any manner. The URX series allows for the attachment of various rail-mounted devices, much like its Knight's Armament predecessors, the Rail Interface System (RIS), the Rail Adaptor System (RAS), and the Knight's Armament Company Free Floating Rail Adaptor System (FF RAS). Unlike them, the URX series differs by eliminating the use of a delta ring between the handguard and the upper receiver of the weapon, since itself becomes the barrel nut, which secures the barrel to the upper receiver. On late-model AR15s that feature a railed flat-top upper receiver, this effectively creates a single long upper rail running the entire length of the weapon, from the beginning of the receiver flat-top at the rear portion of the upper receiver all the way to the forward termination of the upper rail on the handguard. This unit is a free floating unit in that it never touches the barrel of the weapon (much like the Knight's Free Floating RAS). While the earlier rail systems by KAC could be installed easily by the end user, the URX requires specialized tools. Installation of the URX on an existing firearm requires it being sent to KAC or to a few select dealers. The URX provides several advantages. It provides an uninterrupted rail and does not increase the height of the rail over the barrel, which may cause sighting problems for attached optics, unlike the ARMS Selective Integrated Rail (SIR) system. With the URX installation, the barrel is free-floated, allowing for increased accuracy. Due to increased contact with the upper receiver, increased heat transfer occurs, making the URX a better heat sink, reducing the chance of "cook off". Unlike other free-float systems available from LMT, Daniel Defense, Larue Tactical, or KAC itself, the lower can be removed for easy cleaning of the barrel. The lower half slides into rails in the upper half and is locked into position with 1/4"-20tpi hex nuts. To mount an M203 on a firearm with a URX II rail system requires the URX II M203 rail (KAC Part number: 23184). The lower half of the URX II is removed. Then the M203 is locked into the M203 rail, which itself slides into the URX II rail and is secured with hex nuts. This allows the recoil of the M203 to be absorbed by the whole upper receiver assembly, not just the barrel itself. The URX II is currently available in a carbine-length version that weights 8.6 oz., a mid-length version for use with an 11.375"-long gas system that weighs 12.7oz., a match version for rifles that weighs 14.4oz. (KAC Part number: 23258), and an SR-25 version. On the bottom and the sides of the carbine version are fifteen mounting slots. Odd-numbered slots are marked starting with 17 at the rear, going up to 31. The top has seventeen slots, marked T15 to T31. The mid-length version is made from cutting down a match version. It has twenty-two mounting slots on the sides and bottom and twenty-three on the top. The front of the top section has a notch cut out for fitting KAC's barrel-mounted folding flip-up sight. The markings are identical to the carbine version, except going up to 37. The match version has 31 slots on top and 29 slots on the other three sides with numbers going up to 45. http://en.wikipedia.org/wiki/Knight's_Armament_Company_Upper_Receiver_ExtensionDésolé pour les non anglophones, pas envi de tous traduire (et les web translators sont vos amis). Descriptif Airsoft: - Citation :
-
G&P SR16 URX (Shorty) # Magazine Capacity: 130 # Length: 720mm / 805mm # Weight: 3100g # Built Material: Metal & ABS # Inner Barrel Length: 11.5" # Muzzle Velocity: 380-400fps # Gearbox: Version 2 # Motor: G&P M120 Hi-Speed # Battery: Advise using 7.2v or 8.4v Battery (Not Include) Includes: # M4 URX Front Set # SR16 URX Metal Body (GP541) # M16 Magazine (130rds) (GP094) # Knight's Type Front Sight (GP555) # Military 600m Flip Up Rear Sight (GP254) # Knight's Sniper Type Trigger Guard (GP508) # Multi Magazine Catch (GP535) # M4 Metal Body Sling Mount (GP638) # M4A1 Extended Battery Buttstock (Black) (GP416) # RIS Grip (Black) (GP033) # RIS Rail Cover (Black) x 2 (GP032B) # T-Shape Connector Wire Set For Recharge # Manual Mais parlons peu, regardons bien: Comme on peut le voir, j'ai payé ma taxe à l'état et ce avec le sourire (en même temps, je venais de me réveiller, donc je n'ai pas réalisé :/ ) Chose sympathique, 1 papier sur la boite indiquant qu'il s'agit d'une réplique ayant une puissance inférieure à 2j etc... et un autre, dans la boite, rappelant le décret sur l'airsoft et tous ça en français. Intérêt? Ce sont des choses pouvant être demandé à la douane Cet AEG, comme tous les G&P d'origine, la connexion se fait par connecteur T. Pas de panique, tous est fournis pour modifier une batterie et aussi de quoi modifier un autre AEG (voir seconde photo). [img] https://i.servimg.com/u/f48/11/08/30/38/01032016.jpg(/img]Chose sympathique à noté, qui ne doit pas se voir sur les photos quand on ne sait pas, c'est le "Multi Magazine Catch", qui permet par exemple à un droitier d'enlever le chargeur avec sa seule main gauche, perso, c'est déjà adopté Petit défaut, déjà vu sur G&P, c'est le Hop Up dur à tourner (obligé d'y aller doucement avec une pince pour ma part), mais au moins ça ne bouge pas. test de tir: je n'ai aps encore eu le temps de tirer beaucoup de billes, mais j'en ai des frissosn dans le pantalon Une petite photo de famille: D'autres photos et d'éventuelles descriptif dés que j'ai le temps
Dernière édition par Blacoxp le Dim 9 Mar - 1:00, édité 3 fois | |
|
maxim' Apprenti Newser
Nombre de messages : 299 Age : 31 Localisation : chatou Date d'inscription : 23/06/2007
| Sujet: Re: SR16 URX G&P (shorty) Sam 1 Mar - 13:35 | |
| Dis donc ça ce met au G&P chez les coop, manque plus que db Superbe achat Tu as pris quel transporteur? paske en 2 jours et demi c'est très rapide | |
|
Blacoxp Admin
Nombre de messages : 1320 Age : 35 Localisation : Saint Germain en Laye Date d'inscription : 19/02/2007
| Sujet: Re: SR16 URX G&P (shorty) Sam 1 Mar - 13:50 | |
| Le Db il a déjà son achat en tête Transport par Chronopost (et ouais, comme quoi). Je n'ai toujours pas reçu mon mail de tracking d'ailleurs | |
|
maxim' Apprenti Newser
Nombre de messages : 299 Age : 31 Localisation : chatou Date d'inscription : 23/06/2007
| Sujet: Re: SR16 URX G&P (shorty) Sam 1 Mar - 13:54 | |
| lol pour le numéro de suivi, dommage que ça va pas aussi vite avec tout le monde, mais je suis toujours sur le cul la paske normalement la il vienne juste de finir de le préparé et ba nan il est déja chez toi, bravo a redwolf | |
|
Blacoxp Admin
Nombre de messages : 1320 Age : 35 Localisation : Saint Germain en Laye Date d'inscription : 19/02/2007
| Sujet: Re: SR16 URX G&P (shorty) Sam 8 Mar - 21:13 | |
| | |
|
maxim' Apprenti Newser
Nombre de messages : 299 Age : 31 Localisation : chatou Date d'inscription : 23/06/2007
| Sujet: Re: SR16 URX G&P (shorty) Sam 8 Mar - 23:01 | |
| superbe photo +1 pour la mise en scène | |
|
Psycopate Membre occasionnel
Nombre de messages : 128 Age : 35 Localisation : Val d'oise (Eragny sur oise) Date d'inscription : 24/02/2008
| Sujet: Re: SR16 URX G&P (shorty) Sam 8 Mar - 23:26 | |
| | |
|
Damien
Nombre de messages : 27 Age : 33 Localisation : St Germain en laye Date d'inscription : 30/12/2007
| Sujet: Re: SR16 URX G&P (shorty) Sam 8 Mar - 23:52 | |
| très belles photos - Blacoxp a écrit:
- # Battery: Advise using 7.2v or 8.4v Battery (Not Include)
je suppose que tu n'y as pas mis une 7.2V | |
|
Blacoxp Admin
Nombre de messages : 1320 Age : 35 Localisation : Saint Germain en Laye Date d'inscription : 19/02/2007
| Sujet: Re: SR16 URX G&P (shorty) Dim 9 Mar - 0:35 | |
| Non, elle tourne actuellement en 9.6 2300 Firefox et je pense qu'elle va y rester (du moins en 9.6). De toute façon, les possibilités avec une crane restent faibles. Et puis je ne suis même pas sûr qu'il y ait le moindre tir en 7.2 de toute façon J'essayerais en 8.4, juste pour voir :/ | |
|
Contenu sponsorisé
| Sujet: Re: SR16 URX G&P (shorty) | |
| |
|